Dual Fuel Range Cooker With 13amp Plug
Are you a cook at home who appreciates the nimble heating control of gas cooktops but needs an electric oven for baking? Discover a dual-fuel range cooktop that gives you the best of both worlds.
Many home chefs with experience prefer gas cooktops due to their superior temperature control and the ability to use advanced cooking techniques like charcoaling. These powerhouse stoves can be expensive, particularly when you need an additional gas connection and electrician to install it.
What is a 13amp plug?
If you have a dual fuel range cooker (also known as a gas and electric oven) then you'll require a suitably rated 13 amp plug. The plug should be wired by a licensed electrician into the cooker ring.
This ensures that the flow of current through the plug will not exceed the limit of safety, which could lead to an electrical fire. The plug has an electric fuse that regulates the current. The fuse will blow when it is deemed to be overloaded. This safeguards the appliance from an overload of electricity.
The fuse is classified at 13 amps, as indicated on the top of the plug and it indicates the maximum current that the plug can carry without causing damage to the appliance or overheating the socket. When replacing fuses, it is crucial to use the same amp rating as the original. If you replace the fuse with one of a different rating, then you are at risk of overheating the socket and possibly putting yourself and others in serious risk.
A 13 amp fuse is likely to be a type of ceramic that is extremely durable and can withstand the high temperatures produced by the range cooker. Ceramic elements are also resistant to fire and is therefore a better option than other kinds.
There are a few different ways that 13 amp plugs can be installed. It may be wired to an existing live socket and the flex then connected to it using a screw or plastic jaw-type cord clamp. The plug should be placed in a secure position and tightened, making sure the clamp is secure.
Before connecting the wires, you may have to remove the wiring diagram on cardboard that is positioned over the pins of some plugs. The wires should be cut to the proper length, as when they are too long they can get crushed when the plug covers are replaced. The earth wire should be the longest in order to connect it before the neutral and line pins.
How do I fit an outlet with 13amps?
The majority of dual cookers that use fuel in the UK are equipped with an amp rating of 13 amps. This is important because ovens can draw substantial current, while normal plug sockets have a rating of 10 amps.
In general new appliances must have a plug installed at the point of sale. This is to comply with the Plugs and Sockets etc. (Safety Regulations) 1994. However, older appliances may not have a plug and this is the reason why the problem occurs.
When connecting a cooker to an existing plug socket the first thing that needs doing is to check that the rating of the fuse in the fuse box is in line with the plug's rating. This is crucial because an incorrectly-sized fuse can be dangerous.
It is also recommended to check that the fuse is completely seated into the cartridge, and that there is no excessive movement. The next step is to prepare the flex to be used. Remove the sheathing from the flex in order to expose the three insulated conductors within. Utilize a utility knife to cut the sheathing just beyond the cord grip at the entry point of the plug. The blade will not be able to penetrate the insulated conductors. The nick should be large enough that the sheathing can split and expand the nick as it is pulled back, revealing the cable beneath. Cut off the excess sheathing, leaving a little more than 40mm over the flex.
The flex is positioned over the plug and the earth terminal is placed at the top and the live and neutral terminals at the bottom. Using the coloured conductors to guide you, the sheathing is then removed from each pin, and the internal cable is inserted to the correct terminal using the cord grip. If the plug is fitted with a screw type cord clamp, loosen this and then pull back the insulation to reveal the copper conductors. Connect each insulated conductor to the appropriate terminal (starting with the earth, then neutral and finally the live) using the channel they are running through the plug.
What is the maximum draw of a plug with 13amps?
The maximum current draw for the 13amp plug is 3kw at 230 volts. This is a large amount of power, however the standard fuse in the UK plugtop won't fail until the cable reaches a dangerous temperature. It is essential to be aware of the electricity you use in your kitchen as a faulty plug or socket can lead to an explosion.
The fuses in plugtops are ceramic, about 25mm long and rated 240V mains. range dual fuel cooker Ovens And Hobs will bear the BS Kitemark or similar mark on their side, and they will contain sand. Plastic or glass alternatives are available, but they should not be used in conjunction with live plugs.
The majority of dual fuel range cookers in the UK require hard-wired and will not plug directly into an outlet on the wall. They are typically connected to a dedicated cooker ring circuit which is only suitable for appliances that draw up to 20 amps.
Examine the ring circuit in your home with the fuse box, or call a local electrician. You can ask them if the sockets are on the same ring or if they're separate. They should also be able tell you if there's a separate circuit to power your oven.
The size of your kitchen will be a major factor when you're looking to buy a dual-fuel range cooker. We offer a variety of cookers that can fit any space. Choose from compact 50-60cm dual fuel models or huge 90cm+ double oven options from top brands like Rangemaster and StovesAreUs.
We also have a broad selection of multi-function electric and gas cookers. These versatile machines allow you to cook a variety of meals, like pasta, casseroles and curries.
Currys offers a variety of Cookers. Explore our online selection or visit us in our store to see the range. We offer free installation at home and delivery on a selection of range cookers as well as flexible payments options. Our team is on hand to answer any questions you have. Contact us by email or telephone. Credit is subject to the status of the account, and terms and condition apply.
What is the most draw for the switch on a cooker?
There is a lot confusion about the maximum current draw of a cooker switch. The reality is that the majority of cookers aren't designed to connect to the standard socket, but instead are wired hard and connected to a specific oven ring circuit. This is because they will typically consume more than 20 amps of power each time the gas hob and electric oven are used.
You will not find dual fuel range cookers that are able to be fitted in standard sockets, since this could pose a significant fire risk and violate electrical regulations. A licensed electrician should install new electrics in the kitchen to the cooker. They will also ensure that the load of the oven and hob do not exceed the circuit's supply capacity.
Dual fuel range cookers blend the responsiveness of a gas stove with the precision and accuracy of an electric oven. This is the reason they are popular among chefs and home cooks alike. If you are looking to experiment with different cooking techniques, such as searing and charring, a dual fuel range cooker is the best option.
When purchasing a new range cooktop, you need to consider several factors such as size, function, and price. You will also require an electrical connection to your home to connect the appliance. If you are unsure then book an appointment with a Gas Safe engineer to inspect your property before installation.
The Currys range of dual fuel range cookers includes options that can be adapted to a range of budgets, from basic models from Indesit and Zanussi to our own exclusive Essentials collection. If you're looking for something little more advanced, we also stock a wide selection of premium JennAir models, with several unique features.
It is important to read the instruction manual for the owner before purchasing a dual-fuel range cooker. This will give you specific information regarding the gas and electrical requirements. You will require gas connections in your home. A plumber could be required to set it up for you. You may also need a cooker-ring circuit that is installed by a certified electrical engineer.